BMNKY - 194 EPOXY PAINT

  • MSDS: BMNKY
  • Manufacturer: PLASTI KOTE CO INC
  • Product Name: 194 EPOXY PAINT
  • National Stock Number: 8010-00F022145
Product Identification

Product ID:194 EPOXY PAINT
MSDS Date:01/31/1990
FSC:8010
NIIN:00F022145
MSDS Number: BMNKY

Responsible Party
PLASTI-KOTE CO INC
1000 LAKEROAD
MEDINA, OH 44256

Emergency Phone: (216) 725-4511

Info Phone: (216) 725-4511

Cage: 07778

Contractor
TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
MEDINA, OH 44256 US

Telephone: 330-725-4511

Cage: 07708

Ingredients

ACETONE; DIMETHYL KETONE

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 25-30%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 25-30%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOBUTANE, 2-METHYLPROPANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 27%

OSHA PEL 1800 MG/CUM

ACGIH TLV: 1000 PPM


NON-HAZARDOUS FOR INGREDIENTS

Fraction By Weight: 15-20%


7-8

RTECS: 9999999WG

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NASAL/RESPIRATORY
IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE,
UNCONSCIOUSNESS, ASPHYXIATION & PERMANENT BRAIN/NERVOUS SYSTEM
DAMAGE. EYE: IRRITATION/REDNESS/TEARING/BLURRED VISION. INGESTION:
GASTROINTESTINAL IRRITATION/NAUSEA/VOMITING/DIARRHEA. SKIN:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: NASAL/RESPIRATORY IRRITATION,
DIZZNESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE, UNCONSCIOUSNESS,
ASPHYXIAT & PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. EYE:
IRRITATION/REDNESS/TEARING/BLURRED VIS ION. INGESTION:
GASTROINTESTINAL IRRITATION/NAUSEA/VOMITING/DIARRHEA. SKIN:
IRRITATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
GIVE OXYGEN. ADMINISTER ARTIFICIAL RESPIRATION IF NOT BREATHING.
EYES: FLUSH W/WATER FOR 15 MINUTES KEEP EYELIDS OPEN. INGESTION:
DON'T INDU CE VOMITING (ASPIRATION OF MATERIAL INTO LUNGS CAN CAUSE
CHEMICAL PNEUMONITIS WHICH CAN BE FATAL) KEEP PERSON WARM. SKIN:
WASH W/SOAP & WATER OR HANDCLEANER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point:0F
Lower Limits:1%
Extinguishing Media:ALCOHOL, FOAM, CO2 & DRY CHEMICAL
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. USE FOG
NOZZLES. WEAR SCBA. COOL CLOSED CONTAINERS TO PREVENT PRESSURE
BUILD-UP/AUTOIGNITION/EXPLOSION WHEN EXPOSED TO HEAT.
Unusual Fire/Explosion Hazard:VAPORS ARE >AIR & MAY TRAVEL ALONG THE
GROUND OR MAY BE MOVED BY VENTILATION TO IGNITION SOURCE & IGNITE
AT LOCATIONS DISTANT FROM HANDLING POINT.

Accidental Release

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT, OR
OTHER ABSORBENT MATERIAL & TRANSFER TO A CLOSED CONTAINER.

Handling

Handling and Storage Precautions:DON'T STORE IN AREA >120F, DIRECT SUN
LIGHT, HEAT OR OPEN FLAMES. DON'T PUNTURE OR INCINERATE. AVOID
CONTACT & BREATHING VAPORS.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS PROTECTED FOR
STORAGE OF NEPA IC FLAMMABLE LIQIDS. INTENTIONAL MISUSE
DELIBERATELY CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL OR
FATAL.

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA RESPIRATORY PROTECTION OR
EQUIVALENT OR LEAVE THE AREA.
Ventilation:SUFFICIENT MECHANICAL (GENERAL) &/OR LOCAL EXHAUST TO
MAINTAIN EXPOSURE Protective Gloves:CHEMICAL RESISTANT SUCH AS NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM &
REMOVE/LAUNDER CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:1500F
Vapor Density:>AIR
Spec Gravity:(H20 = 1) <1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT,
Percent Volatiles by Volume:85-90%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT/SPARKS/OPEN FLAME/SMOKING/ELECTRIC
MOTORS/DIRECT SUNLIGHT/TEMPS >120F OR OTHER SOURCES OF INGNITION.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO2, CO,
VARIOUS HYDROCARBONS & NITROGEN COMPOUNDS.

Disposal

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAYBE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE
W/LOCAL, STATE & FEDERAL REGULATIONS. DON'T PUNCTURE OR INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.